Reverse Osmosis Systems (Specifications)

			Whole House Filter Systems for City Water and Well Water

•	City Water Filter Systems
•	Well Water Systems
•	Drinking Water Systems
•	Travel/Emergency Filters
•	Water Testing Tools

SQC™ RO System

Water Factory Systems SQC-Series 22 to 33 gallon per day high-flow reverse osmosis system

Back | FAQs | Download Printable PDF Version

Description	Under-the-counter reverse osmosis drinking water system
Application	May be used on municipal and private water supplies
	Recommended for residential applications
Features	NSF certified and listed
	Sanitary Quick Change filter cartridges for easy installation and service —
	no spills, no mess
	5 micron graded density sediment pre-filter for optimal dirt holding capacity
	Granular activated carbon prefilter to protect membrane*
	High Flux TFC or CTA RO Membrane
	Radial flow block carbon polishing filter for highest faucet output
	Installation kit includes feedwater valve, 2.5 gallon (9.5 liter) storage tank,
	long reach air gap faucet
	Patented stealth flow control	Slim profile, space saving design
	High performance automatic shut-off valve

SQC Series Specifications
Model	Part#	Membrane	Membrane Capacity**	Application Guidelines
SQC CTA	04-041	CTA	13-19 GPD (49-72 LPD)	chlorinated water
SQC 2	04-043	TFC	22-33 GPD (83-125 LPD)	non-chlorinated water
SQC 3	04-045	TFC	22-33 GPD (83-125 LPD)	chlorinated or non-chlorinated water
SQC 4	04-063	TFC	22-33 GPD (83-125 LPD)	chlorinated or non-chlorinated water

NOTES: * For SQC3 and SQC4 models

** Capacity based upon water feed of 350 ppm (mg/l) TDS @ 60 PSI (413.7 kPa) @ 77°F (25°C)

Recommended feed water pressure 40-100 PSI (275.8-689.5 kPa)

SQC CTA, SQC 2, SQC 3 Dimensions 16"H x 11"W x 4.2"D (41cm H x 28cm W x 10.7cm D),

Shipping weight 24 lbs. (10.9 Kg)

SQC 4 Dimensions 26"H x 17"W x 16"D (66cm H x 43cm W x 41cm D),

Shipping weight 21 lbs. (9.5 Kg)

Feed Water Requirements
Parameter	Limits	Parameter	Limits
pH-CTA	5.5-8	Hydrogen Sulfide	none allowable
pH-TFC	4-11	Temperature-CTA	40-85°F (4.4-30°C)
Hardness	<350 ppm (mg/L)	Temperature-TFC	40-100°F (4.4-30°C)
Iron (Fe)	<0.1 ppm (mg/L)	Total Dissolved Solids-CTA	up to 1,500 ppm (mg/L)
Turbidity	<1 NTU	Total Dissolved Solids-TFC	up to 2,000 ppm (mg/L)
Manganese	<0.05 ppm (mg/L)	Water Pressure	40-100 PSI (275.8-689.5 kPa)

CAUTION: Do not use where water is microbiologically unsafe or with water of unknown quality. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts. Water supplies that exceed limits for hardness, iron, manganese, hydrogen sulfide require pre-treatment.

Click here to see the Contaminant Reduction Performance

Purification Assembly Components SQC 2, 3 & 4		All drinking water appliances are factory tested and
(1) Sediment pre-filter: 5 micron depth cartridge		prepared for installation.
(1) Membrane type: Thin film composite		System production: 11 GPD (41.6 LPD)
(TFCM)		NOTE: Actual production rate and TDS reduction
Standard tank capacity: 2.6 gallons (9.8		will depend upon temperature, TDS level,
liters) maximum		membrane variation and usage pattern.
Contact your authorized dealer

Visit our showroom, lab and offices just a block from the beautiful Monterey Bay!
743 41st Ave. Santa Cruz, CA 95062