Groundwater constitutes the largest source of usable, unfrozen fresh water on the planet. Approximately 21% of the Earth's freshwater is in the form of ground water. Roughly fifty percent of the U.S. population derives some portion of their fresh water from ground water.

Ground water is water which is located below the soil surface and contained in the pore spaces of bedrock, sand, gravel, and other such materials. Most ground water originates from precipitation that soaks into the ground. The ground water system as a whole leads the water in the general direction of the ocean.

This can either occur by movement through the ground or by flowing out and joining streams or rivers. For the most part, there is a continuous process of exchange between stream flow surface waters and ground water.

The movement of ground water occurs both vertically and horizontally in response to gravity and hydraulic pressure. This movement is through the aquifers which are the well-saturated zones. These zones consist of a layer of rock or sediment that is permeable to ground water flow in usable amounts. The main method of ground water movement is through percolation. This movement is much slower than the of surface water and is dependent upon the amount of slope in the water table.

The two most common means to obtain supplies of ground water are springs and wells. A spring is the simplest source of ground water as it occurs naturally. Springs occur in areas where there is a significant change of permeability in the horizontal direction.

The change in permeability must occur with the upper sedimentary material more porous than the lower material. Thus, flow is greater through the more porous matter and as the flow reaches the less porous matter, a spring emerges. Although, once this water emerges, it is considered surface water.

Excavating a well to obtain ground water is a much more complicated process. In order for planners and developers to determine the location of a well, they must find a reliable source of ground water. In general, sedimentary rocks have the greatest porosity. Such rock types include sandstone and limestone. These define excellent aquifers.

Ground water may pick up minerals and metals as it passes through the aquifer, or may become contaminated by surface water run-off from agricultural, industrial or residential development.